stand header image
stand cover

GEN3

Stand: C100
Electronics test & measurement
Electronics manufacturing services & PCB assembly
Electronics design, engineering & test services
https://www.gen3systems.com

About us

Your Electronics Reliability Partner, Specialist Manufacturer and Distributor of Test, Measurement and Production Equipment.

Providing Process Solutions to the Global Electronics Industry.

Products & services

product-image

AutoCHT

The AutoCHT is a precision tool developed to simulate and control localised condensation on electronic test boards during Damp Heat Testing (DHT). It works by adjusting the temperature of the test board independently of the chamber's environment—adjust test board temperature precisely to 0.1°C control, to at least 1˚C below the Dew Point. Paired with the AutoSIR2+, the tester enables real-time monitoring of how moisture affects different board designs, spacings, and coatings—giving you unrivalled insight into moisture-driven failures.

product-image

HATS²™ - Highly Accelerated Thermal Shock Tester

HATS²™ (Highly Accelerated Thermal Shock) 2 Test System for Convection Reflow Assembly Simulation, Reliability and Robustness Evaluation of PCB and Substrate Via Structures and PTH's. A cutting-edge technology designed to simulate convection reflow assembly and evaluate the robustness of PCB and substrate via structures. With unmatched precision and efficiency, HATS²™ revolutionises thermal shock testing offering unparalleled capabilities, including real-time resistance monitoring, rapid temperature cycling between -65°C and +265°C, and the ability to conduct up to 1000 thermal shock cycles per week. Robustness testing ensures that electronics don’t just work in the lab, but keep working reliably in real-world conditions.

product-image

UV Booth

UV Inspection & Rework Booth -Defect Detection: UV light is used in fluorescent dye penetrant inspection to detect cracks and defects in electronic components and assemblies. This non-destructive testing method ensures high-quality standards. -Cleanliness Verification: UV light helps verify the cleanliness of components and PCBs by revealing contamination invisible to the naked eye. -Fluorescent Penetrant Inspection (FPI): UV light is used to detect surface and sub-surface defects in materials. Fluorescent dyes are applied to the material, and UV light reveals cracks and faults. -Counterfeit Detection: UV light helps in identifying counterfeit products and ensuring the authenticity of materials and components.

product-image

AutoCAF2+

Conductive Anodic Filament Testing -Measurements from all 256 Channels can be taken in <30 seconds -Applied Voltage: +1V to 1250V -Measurement Range: 106 Ω to 1014 Ω -Measurement Method: Continuous on all selected channels -Measurement Test Intervals: Fully selectable from a minimum of 1 minute -Capable of testing to all existing test specifications – IPC – IEC – JNC and other user specifications -Future proofed design -AutoCAF2+ is available with 64, 128 or 256 channel configurations -Adaptable and flexible software operating with Windows 7, 8 &10

product-image

AutoSIR2+

Surface Insulation Resistance Testing -Measurements from all 256 Channels can be taken in <30 seconds -Applied Voltage: +1V to 100V -Measurement Range: 106 Ω to 1014 Ω -Measurement Method: Continuous on all selected channels -Measurement Test Intervals: Fully selectable from minimum of 1 minute -Capable of testing to all existing test specifications – IPC – IEC – JNC and other user specifications -Future proofed design -AutoSIR2+ is available with 64, 128 or 256 channel configurations -On connection the system runs a self test -Adaptable and flexible software operating with Windows 7 onwards

product-image

CM Contaminometer Series

Ionic Contamination Test Systems -New Capability to run ROSE test and PICT -New Advanced traceability features for tracking boards and their history -New Software featuring a new user interface for an enhanced user experience -New Alarms for solution leakage and reduced ventilation -New Built-in conductivity meter -Improved automatic temperature and CO2 compensation to remove any effects of atmospheric pollution from contamination results. -Improved serviceability -Improved accuracy and stability with redesigned hardware for optimum measurement capability -The CM Series is Six-Sigma (6σ) verified as a process control tool -The CM series has proven Gauge R&R (Repeatability and Reliability) of ~2% -High fluid circulation rate, ensuring fast removal of ionic contaminants from PCBA whilst providing smooth, bubble-free circulation at all times -Unique CURVE-FITTING Analysis algorithm (Merit of Fit) to predict results of longer tests -Unique solid gold measuring cell, ballistic amplifier providing a test accuracy of <0.005μS/cm -Complete testing cycle of only 3-minutes & full regeneration in typically < 6 minutes

product-image

MUST3

Solderability Tester -Automatic component alignment and testing -Immediate pass/fail information on completion of each test -Step and repeat function for multi-leaded devices -4 Individual globule blocks for wetting balance testing -Testing ability down to 0201 devices -Superior Gauge R&R -Greater accuracy using a sampling rate measuring to levels better than 0.1mN/BIT -Force Resolution 0.001mN -Immersion depth 0-30mm at a resolution of 0.01mm -Immersion speed 0-30mm/s (resolution 0.05mm/s) -USB Camera -Smooth, fast and quiet in operation

News