ALH Systems

NP1010 GENERAL PURPOSE EPOXY RESIN

The NP1010 General Purpose Epoxy Resin is a high-performance, two-part epoxy resin system designed for potting, encapsulation, and electrical protection applications. Engineered to deliver excellent flame retardance, electrical insulation, and mechanical durability, NP1010 is an ideal solution for demanding industrial and electronic environments where reliability and safety are critical. This versatile epoxy resin offers a balance of medium viscosity, good gloss finish, and controlled cure speed, making it suitable for both small-scale assemblies and larger production runs. The system is approvable to the UL 94 V-0 flame retardance standard, providing confidence for use in safety-critical electrical and electronic components. High-Performance Epoxy Resin for Electrical Protection NP1010 epoxy resin is specifically formulated as an electrical insulating epoxy, delivering excellent dielectric and thermal properties. With a volume resistivity of 10¹⁴ ohm.cm and an electrical strength of approximately 15 kV/mm, it provides long-term protection against electrical leakage, short circuits, and environmental stress. The cured resin demonstrates a Shore D hardness of 80, ensuring mechanical robustness while maintaining dimensional stability. With an operating temperature range from -40°C to +130°C (continuous, geometry dependent), this epoxy resin performs reliably across a wide range of service conditions.

NP1490 Water-White Polyurethane Resin for LED Lighting

Water-White Polyurethane Resin for LED Lighting. NP1490 is a high-performance, two-part water-white polyurethane resin developed for applications where optical clarity, UV resistance, and durability are essential. Designed specifically for LED lighting encapsulation and clear castings, NP1490 combines excellent visual transparency with flexibility and impact resistance, making it ideal for demanding industrial and commercial environments. Thanks to its exceptional UV stability, NP1490 water-white polyurethane resin has long-term clarity with minimal yellowing, even when exposed to continuous light sources. This makes it particularly well-suited to LED systems, optical components, light diffusers, and decorative clear castings where appearance is critical. Water-white polyurethane resin with Outstanding Optical Performance NP1490 cures to a water-white polyurethane resin finish with high light transmission and excellent surface quality. Its low viscosity and good air-release characteristics allow the resin to flow easily into moulds and encapsulations, reducing trapped air and delivering smooth, bubble-free results when used with appropriate degassing techniques. The system is formulated to bond well to hard plastics and properly prepared metals, offering reliable adhesion across a wide range of substrates commonly used in lighting and electronic assemblies. Flexible, Tough & Impact Resistant Unlike brittle clear resins, NP1490 cures to a flexible polyurethane with a Shore A hardness of approximately 75. This flexibility provides enhanced impact resistance and vibration tolerance, helping to protect sensitive components such as LEDs and electronic assemblies from mechanical stress. Once cured, NP1490 performs reliably across a wide operating temperature range of -40°C to +130°C (application and geometry dependent), making it suitable for both indoor and outdoor use.

Contract Potting and Encapsulation - Dedicated facility for potting and encapsulation.

Bespoke Custom formulations. Resins and adhesives made to meet your application requirements.

We specialise in high-performance resins, offering tailored solutions for electronic potting & encapsulation applications and product assembly.Our products deliver exceptional performance in: Electronic potting compounds and resins Epoxy and urethane potting compounds Polyurethane potting compounds Electronic encapsulation resins Adhesives for various bonding

NP2001 Rapid Cure Clear Epoxy Adhesive

NP2001 epoxy adhesive is a 2-component multi-purpose product that is ideal for bonding various substrates including wood, ceramics and metals. NP2001 cures to a completely clear product. Key Features Rapid Curing Easy Application Crystal Clear Cartridge Dispensing

NP5005 Polyurethane Gel

NP5005 is a two component soft polyurethane gel system. It forms an excellent water resistant barrier whilst imparting no stress on encapsulated components. The gel is highly malleable, allowing its use in clam-shell cable joints. The resin is flexible at temperatures as low as -60 OC. Key Features Malleable Flexible at Very Low Temperatures Excellent Electrical properties Water Resistant Imparts No Stress on Electrical Components