Ecotile Flooring Ltd
About us
Ecotile is a UK-made industrial flooring solution that can be fitted without causing disruption to your business; a cost-effective and low-maintenance interlocking floor tile that solves damaged flooring problems and business challenges. 100% recyclable and fire retardant, they enhance workplace safety and can be fitted easily over any hard subfloor. They’re widely used in manufacturing facilities, warehouses and heavy forklift use environments. Ecotile is also available as an ESD solution to protect products and personnel from static damage.
Products & services
ESD Modular Flooring / Anti-Static Flooring
Ecotile manufacture high performance static-dissipative floor tiles that protect microelectronics, static-sensitive devices and explosives from damage caused by static discharge. Performing two core functions, our ESD interlocking floor tiles can be installed quickly and used as the cornerstone of your static-control program: Provides a traceable path to ground (> 3.4 x 104Ω and ≤ 5.0 x 106Ω) Prevents static generation (< 100 volts) Whether you are looking to replace a failed/worn floor or create a new ESD protected zone, Ecotile can be integrated into your static-controlled area without hassle. - ESD Protective Flooring Badge - Lifetime guarantee of ESD performance - No disruption or downtime during installation - Can be lifted quickly (ideal for leased/temporary spaces) - Completely reusable, so you’ll never lose your initial investment - No adhesives, special floor prep or moisture protection required - Installable over almost any subfloor - End-to-end solution (including installation, testing and certification) - Resistant to chemical spills - Anti-slip and anti-fatigue properties - Suitable for use in Class 7 & 8 cleanrooms - 10 year warranty Ecotile have over 25 years of experience manufacturing, specifying, and installing ESD flooring for use in electronics manufacturing facilities, circuit assembly/handling areas, cleanrooms, laboratories, data centres and explosive ammunitions facilities.
Industrial Floor Tiles From Ecotile
Industrial Floor Tiles From Ecotile. The original loose-lay interlocking floor tile. Available in two interlocking joint designs, our 7mm tiles are the go-to solution for most applications, including factories, warehouses and garages. They easily withstand repetitive use by forklifts, aisle pickers, pallet trucks, pump trucks and heavy foot traffic. Improve safety with an R10 slip rating and Bfl-S1 fire rating. Mix colours to create walkways and colour-coded zones. The 7mm tile is our best-selling flooring solution used by hundreds of businesses worldwide, including Amazon, Royal Mail and Rolls-Royce. ESD version available. -Impact resistant -Chemical resistant – View chemical resistance chart -Flame retardant (Bfl-s1) -Abrasion and slip-resistant (R10 Rated) -Suitable for heavy rolling vehicles and point loads -Create coloured zoning and walkways -Reduce dust and insulate from cold -Easy to clean and maintain -Hassle-free installation -No curing times required -100% recyclable Perfect for Businesses Who Can’t Afford to Stop. Ecotile can be fitted in sections, allowing you to continue operation during installation. They’re ready to use straight away, without the curing or drying times associated with resin, screed or paint. Applications: -Factories & Warehouses -Railway Stations & Airports -Shops & Offices -Schools & Colleges - Garages & Workshops - Exhibitions & Point of Sale - Sports & Leisure Facilities - Prisons, Police & Fire Stations
Safety floor layouts and messages using interlocking floor tiles
Introducing Ecotile Floor Signage With Ecotile, you can create a safer work environment and promote your brand in a unique and eye-catching way. Safety From The Floor Up Complying with statutory health and safety requirements to display relevant signage is made easier with Ecotile. Simply choose the required signage and position them within an Ecotile modular floor. Wherever you need them the most. Using safety alerts at ground level ensures they are seen easily by your team or visitors, keeping them safe whilst in the workplace. Perfect for: -Forklifts Operating -Fire Points -Hi-Vis Areas -Ear Defenders -Safety Footwear -Emergency Exits -Fire Points -Keep Clear -Restricted / No Access -No Smoking One of the biggest advantages of Ecotile floor tiles is their durability. Our signage tiles are created by precision water jet-cutting of Ecotile floor tiles. This means 100% of the message-tile is made from Original Ecotile floor tiles, so your safety messages and brand logos won’t wear off over time, even with heavy foot traffic and forklift use. Providing long-lasting value and peace of mind. Combine With Coloured Walkways and Work Zones Many Ecotile customers create standout walkways within their premises using Ecotile’s interlocking system. Simply use different coloured tiles to mark out pedestrian walkways, work zones or even create keep clear areas. When combined with safety signage, Ecotile’s range of coloured modular tiles creates unparalleled workplaces.
X500/10 Heavy Duty Flooring 10mm
Ecotile’s 10mm ultra heavy-duty interlocking floor tiles are exceptionally tough. Our thickest tile, the X500/10 can easily withstand heavy loads, high traffic movements, and the rigours of industrial use. Save time on rectifying minor subfloor undulations with our 10mm tile – perfect for areas where subfloors are more uneven and worn. Engineered for Industry. By Us. Our 10mm floor tiles are designed and manufactured by us in Bedfordshire. So, you can be sure they’re made to the highest specification and built to endure exceptionally heavy wear. -Extremely tough and hard-wearing -Excellent resistance to impact and vibration -Protects subfloor from damage -Insulates against cold and damp -Noise dampening -Minimal floor preparation -Improve employee comfort and the aesthetics of your facilities -Ultimate Floor Covering. Installed in Hours. As with all Ecotile Floor tiles, our 10mm tiles are designed to be loose-laid. So, they’re quick and simple to install in just a few hours. Perfect for businesses who can’t afford to stop. They can be fitted in sections, allowing you to continue operation during installation. Choosing Ecotile means you can avoid the cost of continually repainting or repairing damaged and worn concrete. Especially prudent when leasing premises. Simply cover and protect your subfloor with Ecotile, and it’ll serve you well for 20+ years. Next Level Floor Protection. Covering worn subfloors with Ecotile reduces slips and trips. Not to mention preventing forklift accidents on uneven and crumbling floors. A fire-retardant rating of Bfl-S1 class 1 and an R10 slip rating enhances safety in industrial premises. The 10mm tile is ideal for use in areas where heavier fork trucks, aisle stackers or narrow aisle trucks operate. Or where HGVs will be executing tight manoeuvres or rotating wheels whilst stationary. We’ve also installed them in aircraft hangars.
Anti-Fatigue Modular Flooring
Anti-fatigue floor coverings play a significant role in promoting employee health, safety and productivity in the workplace. Yet traditional solutions of loose-laid anti-fatigue matting often cause their own safety issues. Corners curl under trolly and cage traffic, creating unnecessary trip hazards themselves. That’s why at Ecotile we’ve developed a range of anti-fatigue interlocking floor tiles which insert straight in to the Ecotile modular flooring system. Combining industrial floor tiles with anti-fatigue tiles quickly creates dual-purpose areas, with a flat, uninterrupted no-trip floor finish for increased safety. Explore The Range E500 7mm Anti-fatigue Floor Tiles Designed for use in most work settings, these 7mm tiles connect with all E500/7 Ecotile modular floor tiles and accessories. They feature a raised disc surface finish and provide enhanced comfort thanks to their 62 Standard ISO Shore A rating. Tough enough for industrial environments, yet soft enough to make a difference to employees’ comfort, productivity and wellbeing. X500 7mm ESD Anti-Fatigue Floor Tiles Where controlling static is essential, the Ecotile ESD anti-fatigue tile provides the same level of static control as our original ESD tiles. Plus they also deliver a softer, more comfortable workspace for employees standing for extended periods in ESD-controlled environments.
X500 – MoD Specification Conductive Floor Tile
Developed over a 2-year period working exclusively with the UK’s Ministry of Defence (MoD), Ecotile has created a new ultra-low resistance, modular electro-static discharge flooring solution for use in explosives processing facilities and areas where static shocks could be lethal. Ecotile’s new specialist dissipative tile has been designed to meet the MoD’s Conductive Regime – a protocol required in areas where small static charges can cause OME (Ordnance, Munitions and Explosives) with ignition energies of 1mJ and below to ignite. So that static can be dissipated rapidly and safely, the Conductive Regime requires flooring to have less floor to earth resistance than civilian ESD flooring. Reviewed and tested by the MoD Defence Ordnance Safety Group (DOSG) in an Ammunition Process Building (APB), Ecotile’s new modular conductive flooring system delivers an average surface resistivity of 26.4KΩ. Perfect for use across the defence estate: - Explosives processing facilities - Ammunition Process Buildings - Use in Explosive Category C & D licenced buildings The DOSG highlighted in their technical assessment document that modular floors also offer some significant advantages when compared to other currently approved MoD ESD surfaces: - Currently, when sections of approved flooring are damaged or fall outside of tolerance, large sections of floor must be replaced, or the entire floor - Replacing large sections of floors is a costly and disruptive event - Modular floors offer the ability to interchange one damaged tile with another in a matter of minutes and return the building or work area to compliance quickly - Modular ESD tiles minimise disruption or downtime of an MoD asset whilst providing a significant financial saving