
Shenzhen Boyunfa Technology Co.,Ltd
12-zone Nitrogen Reflow Oven
What Advantages Does a 12-zone Nitrogen Reflow Oven Have Over a Conventional Reflow Oven?
The advantages of a 12-zone nitrogen reflow oven are summarized as follows:
1.With sufficient independent heating zones, it delivers higher temperature control accuracy and a more gentle temperature rising slope. For special substrates such as thick copper PCBs, ultra-thin multi-layer boards and FPC flexible boards, it can greatly reduce the thermal stress applied to the board, minimize substrate deformation, and fundamentally improve the final soldering quality.
2.The 12-zone configuration corresponds to a longer furnace chamber, which enables more sufficient hot air circulation inside the oven and better overall heating uniformity across the whole board. For large-size PCBs, boards with high-precision BGA components, and high-density boards mounted with 0201, 01002 micro-components, the welding quality stability performs far more reliably.
3.The 12-zone design adds one extra independent cooling zone, which supports stepwise gradient cooling instead of the sharp quenching used in conventional equipment. If many heat-sensitive components undergo rapid cooling, internal stress will easily remain inside the solder joints. Their performance will appear normal during factory testing, but hidden cracks are very likely to occur in the solder joints under continuous vibration during long-term subsequent use, bringing hidden risks to long-term reliability.
4.The nitrogen concentration inside the furnace can be controlled below 200PPM at the minimum, which can greatly reduce the soldering void rate, perfectly improve the wetting and climbing effect of molten solder, fundamentally guarantee the soldering reliability, and significantly reduce the defect rate of pseudo soldering and cold joints.

