Inspection - Automatic Optical Inspection & X-Ray

Our process explained:
We use a ALD625PRO AOI machine to inspect 100% of our SMT
output for component presence, polarity, alignment, soldering
quality, and workmanship defects. It provides fast, objective
verification in an accurate and repeatable way, which ensures
that defects are detected early and quality standards are
consistently met. We run a first off of every SMT build through
the AOI for programming and validation prior to build.
We have an on-site Nikon XTV 160 X-Ray machine which is
used to verify solder joint integrity and internal component
quality. It allows us to see inside packages and solder
connections that are invisible to optical inspection, making it
essential for inspecting components such as BGAs, QFNs. It also
has CT Scanning inspection. We are able to create custom X
Ray programs for consistent part inspection.

Our specification:
AOI - ALD625PRO
Fully customisable profiles and offline programming
Board dimensions Min 50 × 50mm to Max 430 × 330mmBoard thickness Min 0.3mm to Max 10mm
PCB component height up to 50mm
First off inspection carried out on all assemblies
X-Ray & CT Scanner - Nikon XTV 160
XRAY Spec: Xray spot size 1um
Defect recognition capability: 500nm
System magnification up to 36,000x
Power rating of kV 160 kV