Want to see these products in person?

Working with a partner on a component for a robotic surgery system, Cambridge Design had found that even lightweight aluminium was too heavy, so acute were the tolerances of the system. This meant that magnesium AZ80 was introduced alongside aluminium alloys. Metals used for medical equipment require powder coating in most instances and this was no exception. The powder coating protects the underlying metal from any corrosive substances or abrasion and provides an easy-to-clean surface. Powdertech Surface Science is very familiar with coating magnesium parts as well as aluminium and has unrivalled expertise in masking procedures for intricate and complex designs. See our INTRICOAT service page. With the masking scheme agreed, we carried out chrome-free pre-treatment followed by precise custom masking and final coating with a high performance Syntha Pulvin powder coated finish. This all takes place in the dedicated INTRICOAT facility within our plant.

A single free standing etching tank for producing PCB's from either photo resist board or plain copper clad board. The tank includes a 500W heater and thermostat sensor. It also has a pump fitted which forces air through two bubble bars to provide and even etching. Separate illuminated switches control mains power and the pump, and a neon indicates heater operative. The switches and neon have splash proof covers. The temperature is set by adjusting the variable thermostat control knob (optimum for ferric chloride 40 to 50 deg C). Supplied with a syphon and 2 metre of mains lead with a sleeved 13A mains plug. Instructions supplied. Dimensions: Width 180mm,depth 525mm,height 380mm Heater: 500W Tank capacity: 5 litres Voltage: 230V

A self contained triple process unit with built in develop/spray wash/bubble etch functions to provide a convenient bench standing system and eliminate the normal mess associated with getting a prototype PCB to the solderable etched stage. Function tanks and splash proof controls are as standard, with all electrics brought together on the recessed front panel and the connections provided at the rear for drain and cold water requirements. The temperature is set by adjusting the variable thermostat control knob. (Optimum temperature for Ferric Chloride is 40 - 45 Deg C) Complete with an IEC socket and supplied with 2 metres mains cable with moulded 13amp plug and two syphons. Dimensions: Width 400mm,depth 525mm,height 380mm Heater: 500W Tank capacity: 5 litres Voltage: 230V

Our membrane switches consist of printed graphical overlays and circuit layers sandwiched together, along with embedded components such as non-tactile, metal dome tactile or polydome tactile buttons, integral LEDs and RF shields, to create the finished product. Design options and features that can be incorporated include: Long-life and durability for harsh environments Heat and chemical resistance Moisture ingress protection Embossed buttons Electromagnetic shielding Tactile and non-tactile materials Embedded LEDs Hidden-till-lit windows Transparent or coloured windows Bespoke printed overlays Hard coat surface finishes Selective surface textures Braille Circuit design Male / Female connectors Precision engineered panels (metal, acrylic and polycarbonate) Solid, chrome and pearlescent inks Satin and matt metallic finishes Polyester (standard and UV resistant) Custom matched colours 100% functionally tested Once assembled, all the electronic components that we produce are 100% tested prior to shipping, ensuring complete customer satisfaction. Number of impressions guarantee Insulation and resistance control testing Ink and materials guarantee Ingress protections to different environments (IP rated) ATEX approved Rfi, ESD, EMC, shielding

RH aims to make your Membrane Keypad design process easier! We have vast experience assisting electronic OEMs in the design and production of quality membrane keypad/membrane switch projects that often need a little guidance from concept design through to production. Here are some helpful points to consider to better streamline your design for production. You will need to consider many alternatives that will affect what is ideal for your interface’s functionality. Our skilled in-house engineers can share their knowledge to assist your design team in manufacturing. Whether you need a sealed HMI to protect from contaminants or a fantastic backlit effect for low-light, we have a solution.

Complex Metal Assemblies of 50+ component parts assembled and 100% tested according to your requirements.

Our fully equipped fabrication department is ideally suited to deal with the many of our customer’s requirements. Whether it is simple modifications to free issue enclosures and boxes, or fully fabricated, painted and branded items, we can provide you with the service you need. Our core processes within the department include: • Sheet metal fabrication • Laser cutting and forming • CNC Punching and welding • Painting and specialist finishings We also have in-house mechanical design capabilities, so if you have a product that you need a bespoke enclosure for, we are able to assist with designing and manufacturing this for you. To complete the fabrication process we use trusted and established suppliers to cater for processes such as anodising, powder coating and screen printing.

Timeless also offer several additional services for further tubing and metalwork fabrication – from bending metal tubes to welding stainless steel components. Recognised for their excellence in bespoke metalwork, the talented team achieve the highest standards in order to meet clients' precise specifications. Clients regularly find that using Timeless’s additional tube fabrication services often helps to save time and budget. These services include; - Welding (TIG and MIG), Brazing and silver soldering - Tube bending and tube rolling - Cutting - 5-axis CNC machining - Tube End Reduction and Tube End Expansion - Laser-etching - Design consultancy and feasibility advice

We offer you sector leading technology in folding precision sheet metal components with a total of four Safan E-brake Press Brakes, capable of bending up to 3 metre lengths in mild steel, stainless steel and aluminium.

We offer a variety of different services to our clients. Currently, we are able to work with surtec, zinc and clear, iridite, nickel, and tin. So no matter what kind of finishing you are looking for on your product(s), we will be able to work to meet your exact specifications. If it’s anodising metal plating you are interested in, then you will be pleased to know that we can offer a full range of colour anodising as well as clear anodising here at LL Potters.

Reflective and grained finishes for tube profiles and other stainless steel or copper-based components are available from the Timeless professional polishing team. If your bespoke metalwork requires polishing post fabrication, our talented in-house polishing department may be able to help. Timeless boast a fully-equipped polishing studio where we hand-polish tubing and other metalwork for a variety of clients, including architects, boat manufacturers, lighting designers, interior designers, restorers, aerospace professionals, brewers and private clients.

Manufactured to the tightest tolerances and to the highest cosmetic finishes. Finishes include: Sand blast, brush, polish, heat treatment, grinding. Medical microbial cleaning. Anodising - Tolerance to several microns, clear or coloured. Electroless Nickel Plating, Chrome, Silver. Zinc, Stainless Steel. Powder Coating / E-Coating. Die Casting, Vacuum, Sand, Investment Cast. PTFE.