Want to see these products in person?

SK F4-8 Soldering Flux is a high performing, low solids content alcohol foam and spray no clean flux. SK F4-8 has been formulated to provide greater heat stabilisation for lead free soldering operations and is particularly suited to wave and selective soldering operations. SK F4-8 leaves the absolute minimum of non-tacky or surfactant oily residue and is considered an accepted no clean technology when the end use demands the use of a J-STD 004 type ORL0 flux.

Solderking SK P2-5, SAC305, is a no clean lead free solder paste formulated for lead free applications requiring excellent, defect free soldering of even the most difficult to solder components and board finishes. High Reliability solder paste flux type ROL1 to J-STD-004B, SK P2-5 offers excellent print definition for fine pitch printing and reduced voiding and head-in pillow defects. Benefits High reliability solder paste flux type ROL1 to J-STD 004B Reduces and eliminates voiding and head-in pillow defects Powerful wetting on all board finishes Shiny joint finish, Clear minimal residue Long tack and open times 12 months refrigerated shelf life Made in the UK

Solderking SK P2-5, SnBiAg, is a no clean, low melting point, lead free solder paste. The SnBiAg solder alloy provides users with a reflow peak temperature profile of 170°C-180°C and exhibits a shiny solder joint finish.. High Reliability solder paste flux type ROL1 to J-STD-004B, SK P2-5 SnBiAg offers extended tack and open times in excess of three days. Benefits High reliability solder paste flux type ROL1 to J-STD 004B Reduces and eliminates voiding and head-in pillow defects Powerful wetting on all board finishes Shiny joint finish, Clear minimal residue Long tack and open times 12 months refrigerated shelf life Low Melting Point SnBiAg – 138ºC, Peak Temperature of 170-180ºC. Made in the UK

SolderKing SK P2-80 is a no clean, T4 lead free solder paste that offers enhanced printing for miniaturized components. P-80 provides users with increase activation for the most difficult of assemblies. High Reliability solder paste flux type ROL1 to J-STD-004B. SK P2-80 provides powerful wetting on all board finishes, reduced voiding and long tack times. Benefits High reliability solder paste flux type ROL1 to J-STD 004B Reduces and eliminates voiding and head-in pillow defects Powerful wetting on all board finishes Increased activity Shiny joint finish Clear minimal residue Long tack and open times 12 months refrigerated shelf life Made in the UK

Perfect for use in industries requiring heavy-duty storage, these durable SL containers from BITO will keep up with demand. They're hard-wearing pallet boxes, ideal for use in warehousing and the logistics industry. They maximize your internal packing and storage space, offering practical extras to make every stage of your workflow that little bit easier. These pallet containers from the SL series have a generous load capacity of up to 500kg when used to transport goods. Moreover, with stacked together the static load capacity is an impressive 1,500kg. The lightweight plastic composition makes them a reliable alternative to wire mesh boxes and steel stillages that means you'll never compromise on storage requirements. All models have pallet runners, which makes moving stacks of these pallet containers much easier both by pallet truck and fork lift.

A Sleeved Grommet provides added support and protection for cables or wires passing through metal panels.

Sumac offer two Goodway SW32 Twin Spindle Sliding Heads, with a bar feed of 32mm diameter by 3000mm magazine bar feed . The machines are ideal for lights out, 24-7 machining and the product type best suited, is high volume precision turned and milled parts below 32mm diameter, including spacers, shafts, nuts and bolts, valves etc.

SMA IP68 sealed straight bulkhead jack. This front mounted jack , it has a gold plated body and round contact.

SMA Reverse Polarity, Straight 3 Hole Flange Mount PCB Jack, IP68 Sealed Un-Mated with a Black Non Reflective Nickel and a Gold Plated Contact and PCB Solder Body.

SMA straight full crimp/crimp plug. With gold plated contact and body. Contact and crimp sleeve are annealed for enhanced performance. IP68 Mated when used with heat shrink outer contact and Hex nut made from stainless steel. Suitable for use with RD316 and similar cables in COAX cable group AE. Designed for high performance industrial applications

𝙍𝙤𝙩𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙘𝙖𝙥𝙖𝙘𝙞𝙩𝙮 𝙧𝙚𝙦𝙪𝙞𝙧𝙚𝙢𝙚𝙣𝙩𝙨 𝙛𝙤𝙧 𝙢𝙤𝙙𝙚𝙧𝙣 𝙖𝙥𝙥𝙡𝙞𝙘𝙖𝙩𝙞𝙤𝙣𝙨 𝙖𝙧𝙚 𝙝𝙞𝙜𝙝𝙚𝙧 𝙩𝙝𝙖𝙣 𝙚𝙫𝙚𝙧, especially in electric motors, gearboxes, and automotive transmissions. As the market leader for innovative retaining ring solutions, Smalley has been continually investing in ongoing research and development to meet the demand for high RPM requirements. Smalley's latest retaining ring innovation, the revolutionary Revolox Self-Locking Ring, features a 'dimple and slot' design that safely and efficiently secures your application at high speeds. The top five advantages of Revolox Self-Locking Ring include: ✔ Significantly higher RPM capacity over an equivalent non-locking retaining ring Revolox Self-Locking Rings were tested and optimized for superior and secure high RPM performance. Contact Smalley Engineers to discuss RPM capabilities in your application. ✔ Ease of installation The sturdy 'dimple and slot' design is not easily damaged during installation. ✔ Lightweight With a part weight approximately half the weight of a typical retaining ring, the lower part weight reduces rotating mass and therefore increases efficiency in the application. ✔ Automated installation capabilities Automated installation capabilities make Revolox Self-Locking Rings an ideal solution for high production volumes. ✔ Inherently better-balanced than snap rings Revolox Self-Locking Rings have an inherently better-balanced design that helps decrease vibration. As always, our AFC Europe engineering team can assist you. Come to our stand and find out more!

Modular Smart Interfaces expand the functionality of TRION input modules and the NEXDAQ DAQ system. They are automatically detected and set up in Oxygen software. They are supported on the TRION-MULTI module directly, the TRION-1802/1600-dLV modules with the CB16-D9 external connector box and the new NEXDAQ DAQ system. Interfaces are available for bridge (full / half / quarter), current (4-20 mA), high voltage (up to 600V RMS), IEPE, charge (up to 100000 pC), LDVT, temperature (thermocouple and RTD).

KW2D series smart RFID increases tracking, security, access levels, and productivity of applications. Built for easy integration into industrial systems, this RFID device lets OEM and end users implement secure equipment identification, access control, and traceability. The built-in Ethernet port that facilitates quick connectivity to host devices like PLCs and HMIs using Modbus TCP. A built-in LED and auxiliary buzzer provide feedback on operation status. KW2D readers operate at standard 13.56MHz high frequency, providing a reading distance of up to 15mm depending on the tag style.

Digital microscopes boost efficiency in optical inspection and facilitate collaborative inspection with multiple users. They reduce fatigue, improve ergonomics, and lighten the workload. The new solution from ZEISS delivers all of these benefits and more. ZEISS Smartzoom 100 comes with a user-friendly interface and is the perfect digital microscope for beginners and experts – ready for use from incoming goods inspection to laboratory and for all industries.