Want to see these products in person?

A Sleeved Grommet provides added support and protection for cables or wires passing through metal panels.

Sumac offer two Goodway SW32 Twin Spindle Sliding Heads, with a bar feed of 32mm diameter by 3000mm magazine bar feed . The machines are ideal for lights out, 24-7 machining and the product type best suited, is high volume precision turned and milled parts below 32mm diameter, including spacers, shafts, nuts and bolts, valves etc.

SMA IP68 sealed straight bulkhead jack. This front mounted jack , it has a gold plated body and round contact.

SMA Reverse Polarity, Straight 3 Hole Flange Mount PCB Jack, IP68 Sealed Un-Mated with a Black Non Reflective Nickel and a Gold Plated Contact and PCB Solder Body.

SMA straight full crimp/crimp plug. With gold plated contact and body. Contact and crimp sleeve are annealed for enhanced performance. IP68 Mated when used with heat shrink outer contact and Hex nut made from stainless steel. Suitable for use with RD316 and similar cables in COAX cable group AE. Designed for high performance industrial applications

𝙍𝙤𝙩𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙘𝙖𝙥𝙖𝙘𝙞𝙩𝙮 𝙧𝙚𝙦𝙪𝙞𝙧𝙚𝙢𝙚𝙣𝙩𝙨 𝙛𝙤𝙧 𝙢𝙤𝙙𝙚𝙧𝙣 𝙖𝙥𝙥𝙡𝙞𝙘𝙖𝙩𝙞𝙤𝙣𝙨 𝙖𝙧𝙚 𝙝𝙞𝙜𝙝𝙚𝙧 𝙩𝙝𝙖𝙣 𝙚𝙫𝙚𝙧, especially in electric motors, gearboxes, and automotive transmissions. As the market leader for innovative retaining ring solutions, Smalley has been continually investing in ongoing research and development to meet the demand for high RPM requirements. Smalley's latest retaining ring innovation, the revolutionary Revolox Self-Locking Ring, features a 'dimple and slot' design that safely and efficiently secures your application at high speeds. The top five advantages of Revolox Self-Locking Ring include: ✔ Significantly higher RPM capacity over an equivalent non-locking retaining ring Revolox Self-Locking Rings were tested and optimized for superior and secure high RPM performance. Contact Smalley Engineers to discuss RPM capabilities in your application. ✔ Ease of installation The sturdy 'dimple and slot' design is not easily damaged during installation. ✔ Lightweight With a part weight approximately half the weight of a typical retaining ring, the lower part weight reduces rotating mass and therefore increases efficiency in the application. ✔ Automated installation capabilities Automated installation capabilities make Revolox Self-Locking Rings an ideal solution for high production volumes. ✔ Inherently better-balanced than snap rings Revolox Self-Locking Rings have an inherently better-balanced design that helps decrease vibration. As always, our AFC Europe engineering team can assist you. Come to our stand and find out more!

Modular Smart Interfaces expand the functionality of TRION input modules and the NEXDAQ DAQ system. They are automatically detected and set up in Oxygen software. They are supported on the TRION-MULTI module directly, the TRION-1802/1600-dLV modules with the CB16-D9 external connector box and the new NEXDAQ DAQ system. Interfaces are available for bridge (full / half / quarter), current (4-20 mA), high voltage (up to 600V RMS), IEPE, charge (up to 100000 pC), LDVT, temperature (thermocouple and RTD).

KW2D series smart RFID increases tracking, security, access levels, and productivity of applications. Built for easy integration into industrial systems, this RFID device lets OEM and end users implement secure equipment identification, access control, and traceability. The built-in Ethernet port that facilitates quick connectivity to host devices like PLCs and HMIs using Modbus TCP. A built-in LED and auxiliary buzzer provide feedback on operation status. KW2D readers operate at standard 13.56MHz high frequency, providing a reading distance of up to 15mm depending on the tag style.

Digital microscopes boost efficiency in optical inspection and facilitate collaborative inspection with multiple users. They reduce fatigue, improve ergonomics, and lighten the workload. The new solution from ZEISS delivers all of these benefits and more. ZEISS Smartzoom 100 comes with a user-friendly interface and is the perfect digital microscope for beginners and experts – ready for use from incoming goods inspection to laboratory and for all industries.

SMD quartz crystals in metal packages are used in particular where a very low resonance frequency or a very low resonant resistance is required. The SMC crystal series for SMD mounting can be produced according to customer-specific specifications. • Wide frequency range available, • Metal housing, • Low resonant series resistance, • Wide operating temperature ranges up to +125°C, • AEC-Q200 qualified versions available, • Typical applications include industrial, consumer, and automotive electronics, • RoHS and REACH-compliant, 100% lead-free, conflict minerals free.

The JXS series is our preferred crystal series for various consumer and industrial applications. • High frequency stability down to ± 10ppm, • Wide frequency range available (16.0MHz, 19.2MHz, 20.0MHz, 24.0MHz, 26.0MHz, 30.0MHz, 32.0MHz, 38.4MHz, 40.0MHz, 48.0MHz), • Recommended standard package sizes 1210, 1612, 2016, 2520, 3225 and 5032, • Wide operating temperature ranges up to +125°C, • AEC-Q200 qualified versions available, • HMR versions available (3000 G shock resistance), • Typical applications include ZigBee, Bluetooth, WLAN, ISM band applications, GSM, DECT, and other wireless standards, • EMC shielding possible, as the metal lid can be grounded, • RoHS and REACH-compliant, 100% lead-free, conflict minerals free.

Jauch offers the dedicated JXS –WA crystal series especially for wireless applications. • Application range: Wireless applications, Internet of Things (IoT) and Industrial (IIoT), Bluetooth / Bluetooth Low Energy (BLE) / Bluetooth Smart, ZigBee, ISM, WiFi / WLAN, LPWAN & more Telecommunication, Wearables, • 22 special frequencies for many RF-transceivers and RF-ASICs, (16.0 / 19.20 / 20.0 / 24.0 / 25.0 / 26.0 / 27.120 / 30.0 / 32.0 / 37.40 / 38.40 / 40.0 / 48.0 / 52.0 / 54.0 / 55.20 / 59.970 / 60.0 / 62.50 / 64.0 / 76.80 / 80.0 MHz), • Tight frequency tolerance, • High frequency stability in temperature ranges, • Lowest equivalent series resistance (ESR), • Lowest aging, • Small ceramic / metal packages 2016, 2520 and 3225, • EMI shielding possible, • RoHS and REACH-compliant, 100% lead-free, conflict minerals free.

SMD Tuning Fork Quartz Crystals offer a variety of standardized for use in industrial, telecommunications and consumer applications. Jauch Tuning Fork Crystals are available in multiple packages and are produced on modern manufacturing equipment using an advanced photolithographic processes. • High frequency stability up to ±10ppm, • Various standard packages (ceramic, metal or plastic) are available, • Operating temperature range up to +125°C, • AEC-Q200 qualified version available, • RoHS and REACH-compliant, 100% lead-free, conflict minerals free.

SMD Inductive Wound Component Solutions Material Options Standard Ferrite Core Inductors Cost-effective for general use Inductance Range: 1µH to 10mH Good for frequencies up to 1 MHz Ideal for economic, high-volume designs High-Current Ferrite Core Inductors Designed for power handling Inductance Range: 0.1µH to 100µH High saturation current capabilities Best for power converters and motor drives Iron Powder Core Inductors Low core losses at higher frequencies Inductance Range: 0.1µH to 1mH Excellent DC bias performance Suitable for high-efficiency power supplies Composite Core Inductors Superior thermal performance Inductance Range: 0.1µH to 10µH High stability under load Best for compact, high-density designs Package Types Standard SMD: Compact and versatile for general applications Shielded SMD: Reduced electromagnetic interference (EMI) Power Inductors: Optimized for high current and energy storage Custom Designs: Tailored for specific performance and size requirements Key Applications Standard Ferrite Core Inductors General-purpose circuits EMI filtering Signal conditioning High-Current Ferrite Core Inductors DC-DC converters Motor control circuits Power amplifiers Iron Powder Core Inductors Buck/boost converters Input/output filtering High-frequency power supplies Composite Core Inductors Portable electronics High-density power modules Automotive power systems Performance Features Wide inductance range for versatile applications Low DC resistance for improved efficiency High Q factor for signal integrity Temperature ratings up to 200°C for demanding environments Quality Assurance Full electrical and magnetic testing Dimensional accuracy and reliability checks Compliance with RoHS and REACH standards Contact us for technical support, specifications, or design assistance. Email: sales@emtl.co.uk