Want to see these products in person?

K. Lacey have invested heavily into our wire crimping services and offer a large number of crimping solutions, these include: Quality approved hand crimping tools used for low volumes. A large variety of crimp applicators for semi-automatic wire crimping machines designed to meet a wide range of electronic applications. Semi-automatic crimping machines are used when a more reliable, cost effective and time-saving solution is required. We work with leading wire crimp brands such as AMP, Harting, Hirose, JST, Molex, TE Connectivity, and Tyco and if we don’t have the appropriate tooling on site, K. Lacey can get tooling made to meet our customers product design.

We use the latest cutting, stripping, and terminating technology to deliver precise, cost-effective wiring harnesses and cable assemblies.

K. Lacey are a specialist manufacturer in the assembly of wiring harnesses and looms. We produce high quality products in our AS9100 approved manufacturing facility based in West Sussex. Our customers use Looms as a key component in a variety of market sectors that rely on high performance products. We support a range of industries including: Aerospace Lighting Medical Automotive EV Electronics

Often products that require assembly into an enclosure, panel or chassis require some form of cable assembly to connect it to external sources, whether that be to another unit, a control panel, PC or mains power. Due to this demand, a dedicated workshop was created to cut, prepare, crimp and assemble many types of cable and wiring looms from very simple earth leads to more complex looms used for automotive testing products.

Grid plates are suitable for batches of rectangular or square parts which have no through holes, especially where a high degree of parallelism is required. The work piece is clamped to the fixture by the vacuum created within the sealed grid pattern area; this fixture will accept heavier machining then most other types of vacuum fixtures. Standard and special size grids are available. Special Benefits: maximum holding forces universal use secure clamping of unmachined workpiece surfaces compensation for minor unevenness and bulges on the workpiece clamping surface using sealing cords Exclusively available from Thame Workholding, please get in touch for further information.

This vacuum clamping system works with a rubber adaptor mat allows holes, pockets and opening to be drilled without loss of vacuum. Multiple components can be machined once the rubber adaptor mat has been prepared. The advantages of Witte’s slotted vacuum plates are their low overall height and in combination with the rubber mat, their suitability for use in high-speed cutting for milling small contours, openings and breakouts. Areas of application light cutting work, such as milling Drill engraving Special Benefits low height Wide range of possible uses thanks to the (mandatory) use of generally reusable rubber adapter mats Can be used in high-speed cutting (HSC) using rubber adapter mats that can be milled plane-parallel for milling small contours Clamping of smaller workpieces possible Handling Simple positioning of workpieces thanks to height-adjustable stop bars limit the vacuum area with rubber adapter mats Exclusively available from Thame Workholding, please get in touch for further information.

Witte Vac-Mat™ What is VAC-MAT ? It is a thin soft polymer mat with many spaced out vacuum points, suckers in different sizes with a fine hole in each centre and a raised lip. On the underside there are six lugs which locate in the special VAC-MAT™ chuck. On the mat under surface there are grid shaped grooves which distribute the vacuum to each of the small holes. A lip right around the outside edge ensures no leakage. What size is VAC-MAT™? All VAC-MAT™s are 2,5 x 200 x 300 mm. The tolerance lies at +/- 0,04mm and concave up to 0,1mm. To increase the size of the working area, the modular VAC-MAT™ chucks are connected to one another and VAC-MAT™s are simply placed on. Is VAC-MAT™ reusable? The working life of a VAC-MAT™ depends on the number and size of cuts made into the mat during machining. Operating temperature for VAC-MAT™? VAC-MAT™, available in RED, BLUE and GREEN versions can be used at 40°C without any limitations. Why WITTE VAC-MAT™ is the right choice for you. Application Wide spectrum of different workpiece forms can be clamped • Milling • Drilling • Grinding • Five sided treatment including milling into the VAC-MAT™ Advantages • Strong hold down force • Clamping surface with a high friction value • Milling through of outer and inner contours • Precise and exact cut outs due to the fact that the workpiece can be milled through into the VAC-MAT™ leaving a clean cut edge Handling • Set up time reduced to seconds as fitting of single rubber seals become obsolete • Surface friendly material which avoids scratching of workpiece surface area • No extra clamping fixture needed

Pumps, units, workstations and liquid separators With a wide range of pumps, units, workstations and liquid separators we are able to offer an efficient and effective vacuum supply for all applications. Vacuum suction from 5 to well over 1,000 cubic meters / hour. All come with ease of maintenance Compact design with easy accessibility Security of the Thame/Witte repair service