Want to see these products in person?

UPM Conveyors, manufacturer of high quality conveyor systems, recently designed a stainless steel system to improve efficiency at a UK beverage closure company. The bespoke system solved manufacturing issues that were resulting in ovality due to a high closure temperature above 45-degrees Celsius, a high level of static and a high reject rate. UPM’s specialists created the bespoke conveyor design, presented it to the company, manufactured and then installed and tested it on the premises, including a static eliminator and a bespoke control system. The closure temperature was reduced to ~30-degree Celsius and the company now benefits from stainless steel conveyor sides, a mobile support frame and PET-G dust covers. Staff can use the bespoke control system via a touch screen HMI to operate variable speed adjustments, to continuously monitor the temperature of the cooling system, and much more.

Up to 40t capability with thickness up to 2mm

Foams designed to perform under heat and pressure High-temperature environments place unique demands on foam materials. Kewell Converters supplies and converts specialist foams capable of maintaining performance when exposed to elevated temperatures, thermal cycling and demanding operating conditions. These materials are commonly used for thermal protection, fire performance, insulation and sealing in aerospace, defence and industrial systems. Material selection focuses on stability, resistance to degradation and predictable behaviour over time. Our engineering-led approach ensures components are designed with the full operating environment in mind, not just laboratory specifications. Visit our stand to see examples of high-temperature foam components and discuss suitable materials for heat-critical applications.

High temperature, fluid resistant signal and control cables

The High Voltage Water Heater is an interior heater for heating water circuits in special-purpose vehicles (industrial use only). It consists of several tubular heating elements and has been validated according to automotive standards to meet highest safety requirements. Its integrated power electronics allows for individual control via LIN bus

Supplied Hinkley point C with highly regulated Nuclear fabrications.

This specialised operation ensures consistent and efficient processing for intricate components.

Starting the Linear Drive Revolution The Horizon 800 CMM breaks new ground in design and innovation using frictionless linear drives, which are the key to its fast and exceptionally smooth motion. The granite table and granite Y-axis rail has been designed to take full advantage of the natural thermal density of this remarkable material. The Y-axis linear drive system has been positioned away from the Y-axis linear encoder so that the heat generated by the linear drive is absorbed by the granite without affecting metrology performance.

A kinetic surface that shapes space through movement, colour, and light. Its responsive canopy filters daylight and animates the interior, creating a living environment for gathering, pause, and collective life.

See the world's leading mass production HP Multi-Jet Fusion 3D printer live on Matsuura stand E260 at Southern Manufacturing 2026.

PTC Contact Heaters of the HP series are dynamic heating elements for precise heating of solids and liquid containers. They consist of a contacted PTC heating element pressed into an aluminum profile. The aluminum profile features a flat design and mounting holes on the outer profile surface which allows for flexible installation and optimum heat transfer. PTC Contact Heaters of the HP series are available in four versions with maximum surface temperatures ranging from 80°C to 200°C, suitable for a voltage range of 12 - 24V or 100 - 240V AC or DC (multi-voltage capable). PTC Contact Heaters come with all advantages of the PTC heating technology. Thanks to the PTC effect, the heating elements dynamically adjust their power without exceeding a maximum temperature. High operational reliability and energy efficiency without any additional switching elements.

As an authorised HUBER+SUHNER UK distributor, we have extensive stocks of Huber and Suhner connectors including RF Micro Miniature connectors, RF Subminiature and RF Miniature connectors, and can supply coaxial and microwave cable assemblies on short lead times.

Renting your equipment from EMC Hire allows you to meet the demands of your business without committing to significant upfront costs. There is no need for capital investment, freeing up cash for other priorities while still giving you access to the tools you need. Hiring is also a cost-efficient solution. You only pay for equipment when you actually need it, rather than owning assets that may spend long periods sitting idle on a shelf. All of our hires are offered with fully transparent pricing. The cost includes maintenance, administration, calibration and verification, so the price you see is the price you pay – with no hidden extras. Because equipment rental is a tax-deductible expense rather than a capital purchase, you can write off the cost against your corporation tax bill, making it an even more attractive option financially. For customers considering a future purchase, hiring provides a valuable “try before you buy” opportunity. You can test the equipment in your own environment and be confident it meets all of your requirements before committing to an investment. There are also no lead times to worry about. You avoid waiting for products to be manufactured and eliminate the risk of delayed release dates, enabling you to start work immediately. Finally, you are protected against technology obsolescence. We continually update our inventory with the latest EM and RF test equipment from a wide range of providers, ensuring we can meet your requirements with current, industry-leading solutions.

JB Environmental Engineering Ltd offers the ET-Series Humidity Chambers. These offer the user the best unique and uncompromised features in Humidity Chambers at competitive prices. The Humidity Test Chambers are an Ideal choice to best suit your product sizes from the available range of standard sizes. The Humidity chambers provide High performance & inherent reliability guaranteed for continuous testing of your products they are manufactured by Envisys Technologies. The Humidity Chambers can be supplied in two versions, either as a Temperature Test Chamber or Humidity-Climatic Test Chamber versions to meet your specific needs. The humidity chambers are available with a temperature range of either -40°C to +180°C or -70°C to +180°C with the Humidity range of 10% to 95%RH. The humidity test Chambers are fitted with a Touch Screen programmable Controller for easy programming and setting of the test chamber conditions, the controller is fitted on the front of the chamber below the window with the following features below: –