Want to see these products in person?

We have extensive experience in the design and manufacture of bespoke silicone keypads and compression moulded components, manufactured by a selection of long-term strategic partners with whom we work in close partnership. This puts us in the perfect position to add value to your product design or mechanical engineering project whatever your silicone moulding requirements.

The PBZ is a high-voltage, large-current, fast-response, bipolar power supply. It supports four-quadrant operation, which means that it can source and sink both positive and negative voltages and currents. The internal AC signal or an external signal can be superimposed on the DC output. You can use the sequence feature to generate test signals for automotive and other electronic devices. Additionally, the PBZ can be used with a variety of loads to perform tests such as motor endurance tests, solenoid operation tests and capacitor ripple tests.

KingsFlux Acid Cored Solder Wire is a highly active solder wire suitable for effective soldering of heavily oxidised finishes. Rapid soldering can be achieved on most common metals excluding Aluminium. This product is not suitable for electronic applications and residues must be removed with warm water. Benefits Highest activity available Residues easily removed Low odour, non-offensive fume Easy to use Excellent thermal stability

A low solids (~4%), rosin / resin and VOC free flux for copper cable tinning when resin residues are not acceptable. The activator in FT-08w is neutralised with soldering temperature and leaves virtually zero non-corrosive residues after soldering. Benefits Water Based Powerful Wetting Reduced Heating Time Non Corrosive Residues Efficient on Plain Copper and Brass Very Clean Residues

Kitagawa Iron Works Ltd (KIW) is a Japanese mixed engineering group established in 1936. Listed on the Tokyo stock exchange the company includes a machine tool division, a foundry, construction division and building materials. Makers of the world’s most popular chuck in the B200 series open centre power chuck. KIW’s stated focus is on “delivering products and services that satisfy customers” and all its employees share in four basic values that form the basis of this focus: • Customer first • Innovation • Sincere heart and courage • Employee Satisfaction KIW’s continual drive is to develop and improve the product range to meet the demands and productivity necessities of the modern manufacturing world whilst maintaining excellent quality, service and support. The current product range includes: Standard Power Chucks Advanced Chucks Rotary Cylinders NC Rotary Tables Power Vices Manual Chucks Work Grippers Robot Grippers Automation Solutions In 1982 Kitagawa Europe Ltd (KEL) was founded to promote the machine tool accessory products firstly in the UK and then by 1985 throughout Europe, Middle East, India and Africa. KEL has built on this strong foundation and has added complementary products to the core Kitagawa range including: Steady Rests and the KEM Mandrel and continues to expand its service and support to the manufacturing sector. Kitagawa providing trust in the future of technology.

BR series – the Next Generation Standard Chuck, possessing extraordinary high precision Gripping accuracy of 0.01mm T.I.R.※3 or less immediately after jaw forming. Reduced jaw-lift achieving stable machining accuracy. With the use of optional Tnut-Plus the chuck maintains the gripping accuracy of 0.01mm T.I.R.※3 or less even after removing and attaching formed jaws. There is no need to reform jaws. Kitagawa standard soft jaws can be used - due to high accuracy of jaw mounting expensive special jaws are not needed. Compatible with B-200 and BB200 series chucks, it is easy to replace these older series with the new BR and there is no need to replace the cylinder or drawtube allowing you to implement the best performance at the lowest cost.

Precision and Flexibility for Enhanced Machining Unlock the full potential of your machining operations with our range of Kitagawa rotary tables. Designed to integrate seamlessly into CNC machining centres. These tables allow for complex and precise multi-axis machining. Whether you’re working with cylindrical parts or executing intricate positioning tasks Kitagawa rotary tables provide the flexibility and accuracy you need. Convert your 3-axis vertical machining centre into a 4-axis or 5-axis VMC economically and enjoy the benefits of one-hit machining. Robust and of super-high accuracy, Kitagawa NC rotary tables including compound versions integrate directly into your machine's CNC system to perform 3+2, 4+1 or full 5-axis cycles. If your machine control is not prepared for 4/5-axis operation, a rotary table can still be added using an independent Kitagawa Quinte controller connected to the machine control's M-code and safety circuits, enabling 4- or 5-axis positional cycles. Why Choose a 1MTA Rotary Table? 4th Axis : This traditional indexing table provides precise rotational movement, making it ideal for machining cylindrical parts and expanding the capabilities of your milling machine. 5th Axis : Offering enhanced precision and greater versatility, the 5th axis table enables multi-dimensional positioning, increasing both accuracy and productivity. Faceplates: Compatible with both 4th and 5th axis rotary tables. Our faceplates ensure secure mounting and alignment for your workpieces. Accessories: We offer a comprehensive selection of accessories, including spares and adaptors. Designed to enhance the performance of your rotary tables. Servicing and repairs: based in the UK we have a team of rotary specialists. With a 1MTA’s high-performance rotary table, you can streamline your operations, boost productivity, and achieve superior machining results. Contact us today to explore the full range and discuss the best rotary table solution for your needs.

Boneham's 'KSL' Type Knurled Slotted Locator Bushes feature a diamond knurled OD for setting or casting into composites or soft materials. Like the press fit version, these locator bushes are used with BONEHAM's Alignment Pins. The slotted bush allows for relief in a lateral direction during alignment, whilst maintaining precise tight tolerances in the opposite direction. Used with BONEHAM bushes, slotted bushes create a highly accurate locating and alignment system. The Knurled Slotted Locator Bushes diamond knurled OD is designed to work seamlessly with composite materials. BONEHAM’s Serrated GS bushes and Alignment Pins create a highly accurate alignment system for mouldings. When ordering identify the slot width required for your corresponding pin diameter in the table

Koh Young full 3D AOI systems provide true measurement of the profile and shape of components and solder joints, using 100% 3D measurement, overcoming the limitation of 2D AOI systems - Full range of demonstration equipment in our facility - Lowest false calls due to highest accuracy measurement - Only solution in the industry to set inspection criteria according to IPC-610 standards - Performs defect diagnosis through measurement-based data and eliminates the causes of possible errors - Powerful 3D solder joint inspection - Zenith 2, Zenith 8way, Zenith Lite and Zenith Alpha available

Fully integrated tube marking module, flexible, practical, resistant Attractive alternative to inkjet markers Tube Marking Module offers high abrasion resistance thanks to thermal transfer printing. High contrast is ensured for good legibility regardless of the conductor color. Simple and fast wire installation in the control cabinet Labeling with Tube Marking Module allows the marking to be rotated and moved on the wire. This is particularly advantageous in control cabinet construction when wires have to be shortened and markings aligned to the front. High flexibility and fast handling The most varied types of tubes (flat, oval, round) can be processed. The material change (exchange of thermal transfer ribbon and tube material) takes less than five minutes. Sequence production with different tube lengths and labeling is possible.

Cost-efficient automation process Enormous time savings of up to 50% due to higher efficiency and accuracy Significant simplification in production Continuous data flow from ECAD or DLW to the machine Cost-efficient just-in-time production for batches of any size Optimal wire depositing High productivity Complex jobs are completed quickly and without great effort Batch or sequence production without changeovers Automatic wire changer with up to 24 different wires Automated marking of the wire by inkjet and tube marking Processing of five different ferrules with the CM F20 module Reliable processing with the highest quality Sequential processing of single-conductor wires in the cross-section range 0.5 – 6 mm2 Consistently high quality thanks to fully automatic production Attractive entry-level model with low space requirement Compact dimensions 2150 × 1545 mm Fits in any room Up to two inkjet markers can be optionally integrated

Korrvu® is a versatile protective packaging solution that keeps products securely centered in the box using a strong, resilient low-slip film to help protect against shock and vibration during transit. Available in both retention and suspension formats, it delivers reliable protection across a wide range of applications, helping reduce in-transit damage while maintaining a clean, premium presentation. It ships flat and is assembled on-site as needed, supporting efficient packing operations while also, the corrugated fibreboard frame is widely recyclable in the corrugated waste stream (even with the film left in place) and is RESY-approved for recycling. In addition to standard formats, we can support bespoke solutions, including custom sizing/configurations, printed options, and stock-holding arrangements to ensure consistent supply for your operation.

3D scanning has never been so intuitive The Kreon Ace portable measuring arm is the perfect solution for inspection and quality control of all industrial parts, whatever their shape, color or size, whether by probing or scanning.

L-Pins are used to align location devices in Jigs and Fixtures. They are precise (-0.0005) and quick to remove. The L shaped handle allows for greater grip and removal. The L shape is ideal when working space is restrictive. Alignment pins can be used with a variety of BONEHAM bushes. Press Fit, Serrated or Slotted type bushes would complete and accurate alignment solution. The handle has a 1/8" cross drilled hole to connect the pin to the jig with an optional cable.