Want to see these products in person?

Following PCB assembly, each module is 100% inspected against original design and manufacturing data. Trained inspectors utilise Automated Optical Inspection (AOI) and comparascopes to ensure that product build quality is achieved every time. ATE can be used to cycle hardware modules through stringent test conditions and calibration procedures. Environmental testing services are also available for accelerated life testing (BURN-IN) of components and to confirm that modules conform to specification under varying environmental conditions.

Instron equipment is an electromechanical universal testing machine, able to perform a wide range of mechanical tests including tensile, compression, bend, peel, tear, friction, and shear testing. Tests are performed on all the aluminium alloys we work with, from 3xxx series up to 7xxx series, and in all formats, cast, extruded and sheet. The results of our Instron testing enable us to work with our clients to help them to understand the optimal surface finishing pre-treatment process they need to take their bonding strategies to the next level, and to achieve repeatability going forwards. The Instron 34TM-50 tests materials in accordance with ASTM, ISO and other industry standards. It has a 50kN load cell and 80mm wide grips, with a thermal chamber capable of reaching 350C.

The 80C196KC MCU is a high-performance member of the MCS® 96 microcontroller family. It is an enhanced 80C196KB device with 488 bytes RAM, 16 and 20 MHz operations. It is implemented in Intel’s CHMOS III process providing a high-performance processor along with low-power consumption.

Our range of Johnson Gage Internal Thread Inspection Systems: Series GJ: Allows the Inspection of Internal threads for Maximum Material / Functional Size and Minimum Material / Pitch Diameter Size of the work piece.

Machined components are becoming ever more complex together with an increasing demand for finishes with premium aesthetics. This has intensified the requirement for precise powder coating on advanced and often delicate designs. Our INTRICOAT service provides a hands-on service for intricate designs, utilising masking schemes designed on CAD systems. We have invested in a dedicated separate facility, located within our plant, to be used exclusively for handling these small, complex components in low volume.

INTRICOAT is precise, defect-free, intricate powder coating with powder coat masking for low volume machined components. This is powder coating as you have never seen it before. Maskings schemes are prepared by our expert team on CAD, in discussion with you. Masking and coating is carried out in a laboratory style room with conscientious attention to detail and quality control. Your machined components have been expertly designed and engineered. They need a beautiful, durable finish. They need INTRICOAT. We are proud of INTRICOAT and take great pleasure in producing a skilled and flawless finish for your product. Designing a masking scheme. Intricate components require very precise areas of surface coating, often defined by masking schemes. We can design these schemes with you to a very high degree of accuracy on a 3D CAD system, meaning that potential pitfalls can be ruled out at the design stage before any prototypes need to be made. Coating thicknesses and tolerances will require careful measurement and monitoring. Specialist coatings and primers may be required. Every angle of every component will need to be scrutinised before it leaves our plant. INTRICOAT brings all of these disciplines together in a dedicated facility.

At Powdertech Surface Science, we understand that the medical sector demands absolute perfection. With our INTRICOAT solution, we deliver precision powder coating for complex, machined components. Specialised Expertise: Our experience allows us to understand your unique specifications and tailor our process including pre-treatment, masking, and coating. Bespoke 3D Masking: Our engineers can design custom 3D masking for complex components to improve accuracy, aesthetics and functionality of the machined components. Advanced On-Site Testing and quality control: We have an in-house lab with a range of tests available including cleanliness levels and coating thickness to ensure optimal powder coating results are achieved.

The ever increasing complexity and artistry of machined components in the UK has intensified the requirement for precise powder coating on advanced designs. This final stage of manufacture, the finish, seems inevitably to be under time pressure. You need your coating to be planned, executed and successfully completed to meet those tight deadlines. We understand these demands, and that they are growing year by year. In order to improve the service we offer and to help you meet the needs of your own customers, we have invested in a dedicated separate facility, located within our plant, to be used exclusively for handling small, complex components. The final stage for your precision part is the precision coating. With INTRICOAT we can plan that stage with you to be ready when you are.

At INTRICOAT, masking schemes are prepared by our expert team on CAD, in discussion with you. Masking and coating are carried out in a laboratory-style room with conscientious attention to detail and quality control.

Caliach's manufacturing business management system is designed from the outset for the smaller manufacturer. Our ERP system incorporates Inventory Management. Items gets checked and deducted. All products that assemble to form that product are deducted and costs are automatically updated.

Investment casting uses wax patterns and ceramic molds to create precise metal parts with complex shapes.