Want to see these products in person?

The Cost-Effective Entry Point to Production Automation Looking for a quick, affordable way to automate your assembly process—but a fully automatic screw feeder isn’t practical due to low screw volumes? The DEPRAG Screw Presenter and Screw Dispenser offer the perfect solution. The Screw Presenter automatically positions each screw for pickup by a handheld or stationary screwdriver, streamlining manual assembly with minimal investment. In contrast, the Screw Dispenser provides screws for manual removal, offering simple yet reliable support for low-volume operations. Designed for screws with a shaft diameter of 1.4–5 mm and a maximum shaft length of 18 mm, this system is especially well-suited for countersunk screws, ensuring smooth, precise handling every time. How the Screw Presenter Works A screw separator sorts and positions each individual screw for pickup. The operator removes the screw with an upward motion for efficient handling. A signal output enables the host controller to monitor and manage the pickup position for seamless process integration. With DEPRAG’s Screw Presenter and Screw Dispenser, you gain a cost-effective, flexible introduction to automation, enhancing productivity without the complexity of a full feeding system.

The DURO-M is a manually scroll chuck with through-hole. It is mainly used on manual turning machines for machining turned parts. The chuck body of the DURO-M is made entirely of steel and designed for optimum accessibility, but at the same time is weight and mass inertia optimized.

SCS provides multiple industry-leading liquid coatings, including acrylics, silicones, epoxies and urethanes. Conformal coatings are thin, nonconductive, dielectric layers that protect devices and components. Each liquid coating provides unique properties and characteristics to benefit a variety of components used throughout the automotive, electronics, aerospace, defense and medical device industries.

Ultra-thin and pinhole-free, Parylene coatings provide excellent moisture, chemical and dielectric barrier protection to critical circuit boards, sensors, MEMS, LEDs, and other components used throughout the automotive, electronics, aerospace, defense and medical device industries.

SCS’ new PlasmaGuard™ conformal coatings provide excellent splash proof and waterproof barrier protection and dielectric properties. PlasmaGuard plasma polymerized nanocoatings are ultra-thin, halogen-free and lightweight, making them ideal to protect consumer electronics, medical wearables and other components.

We offer seals made from a variety of materials. || High performance polymers • PEEK, PI, PSU, PPSU, PPS, PVDF || Engineering and industrial thermoplastics • PA, POM and PE

Seamark PCB X5600 X-ray machine – High specification and low cost professional X-ray The Seamark PCB X5600 X-Ray machine is a compact, powerful and precise X-ray inspection system. The X5600 offers high-performance x-ray imaging and inspection tools, integrated with 90KV X-ray source and flat-panel detector for precise inspection of solder voiding and solder defects. The X5600 is one of the best-selling X-ray machines on the European market offering enhanced features at competitive pricing. The seamark offering allows users to bring the previously expensive and outsourced x-ray inspection process in house. This provides users with a competitive edge over their competition and also opens the doors for third party inspection revenues. AMS offer the complete solution to X-ray inspection at the most affordable price for comparable professional electronics manufacturing X-ray machines.

The Seamark X-Ray SMD reel counter XC1000 can measure hundreds to 100,000 disk chips in approximately 15 seconds. With automatic component recognition and intelligent database, the Seamark X-Ray SMD reel counter reduces the need for time intensive manual counting and the high labour costs associated. Key features: Suitable for reels with diameters ranging from 180-430mm Can process up to 4 reels at any one time Automatic component recognition – Automated parameter setting and counting of unknown components Intelligent database Verification of results through plausibility check Counting of component chains – new software counts with the highest precision Stick and tray – high precision counting in less than 15 seconds Order counting (exact use per order) Inventory mode 2D inspection for electronic components and assembled circuit boards Reduction of downtime and multiple setting-ups Post-order calculation of the used material Can be used in conjunction with the Inovaxe smart storage solutions to provide a fully automated inventory management solution. We also offer UK based service and support for the full range of Seamark SMT equipment. Technical information: Detectable component Resistance, capacitance, inductance, crystal, LED, diode, triode, multi-pin IC, etc X-RAY launching tube Maximum tube voltage 80kV X-RAY launching tube Maximum tube current 0.5mA Inspection Area 150-430MM Diameter Components Size Geometric magnification 150 X System magnification 1000X Detector Image Speed Min 01005 Max Number of Components 50K Stick & Tray Counting Time High Precision 5-15 seconds / disk Counting Accuracy 99.9% Dimension 820mm（L)*1260mm（W）*1920mm（H) Automatic feeding and discharging, automatic test mode- Smart mode Software Supports arbitrary format SPC statistics, images and results can be saved automatically Radiation leakage ＜ 1 uSv/Hour Tray type 1 reel/4 reels We are the proud UK distributors for the UK market and have a demo XC1000 at our facility in Cheshire.

Made from 100% Seaweed and Plant based material 100% recyclable

Secondary operations encompass the essential finishing steps that transform individual components into fully functional products. At Flambeau Europe, our expertise ensures that every part leaving our facility is ready for its intended application, meeting the highest standards of quality and performance. These operations include machining, trimming, drilling, threading, and any other processes required to complete a component beyond its initial moulding. By integrating secondary operations into our turnkey service, we eliminate the need for external subcontracting, reducing lead times, costs, and potential quality inconsistencies. Our team carefully plans each secondary operation to align with the production sequence, ensuring precision and repeatability. Coupled with in-line inspection and rigorous quality control, we maintain dimensional accuracy, surface finish, and functional performance across every batch. By providing secondary operations in-house, Flambeau Europe delivers a seamless pathway from design and manufacturing to assembly-ready components. Customers benefit from reduced handling, faster time-to-market, and a fully integrated manufacturing experience that keeps projects on schedule and within specification. 𝗞𝗲𝘆 𝗯𝗲𝗻𝗲𝗳𝗶𝘁𝘀: • Comprehensive finishing: Machining, trimming, welding, and more performed in-house. • Quality assurance: Rigorous checks ensure consistent performance. • Reduced lead times: Eliminate reliance on external subcontractors. • Cost efficiency: Streamlined processes save time and money. • Turnkey integration: Components ready for assembly or distribution.

With selective plating only a portion of a component is plated. This can offer functional benefits when using different coatings on the same component and with precious metals the advantage of reducing material consumption / cost whilst still maintaining functionality and performance. TPG has designed and developed its own selective gold plating machines for the last 40 years. TPG’s Cyclon machine is the world’s only fully automatic coax connector selective gold plating line – capable of plating selectively either externally or internally a large volume of loose parts. Some applications have even been designed to graduate the internal thickness of plating in the bore so that there is a thicker deposit in the contact area further in the connector than at the opening.

multi pot selective soldering

Selective soldering uses a precise nozzle to apply solder only to designated areas of a PCB. This process is especially useful for mixed-technology boards with both through-hole and surface-mount components. Stewart Technology operates three selective soldering machines, allowing precise control over each solder joint. This makes it possible to solder components in areas that cannot be wave soldered and manage complex or delicate board designs. Selective soldering reduces thermal stress on sensitive components and prevents solder bridging, improving overall board reliability. This high level of control ensures that even the most complex assemblies are soldered accurately, which is critical for boards with tight spacing or sensitive electronic parts. This process provides a balance of efficiency and precision, making it ideal for customers who need reliable mixed-technology assemblies, while maintaining maximum product quality.