Want to see these products in person?

All parts are manufactured to AS9100D, ISO45001 and ISO9001 accreditations. We check all components to high quality standards.

QCT’s commitment to the CMM industry has led to the development of the Quantum 4 CNC, designed by the QCT team, using their vast wealth of knowledge and experience on all types of CMMs over the last 20 plus years. The CMM was fully redesigned from the ground up taking into account the latest advancements in measuring technology and utilising the latest stress analysis software to ensure a rigid yet light design. The new frames design allows for greater variation in model sizes without the loss of accuracy. The Quantum 4 is also available in a manual version.

Metric and Imperial T-Bar Location Pins. Also known as Jig Pins, are removable precision ground location and alignment pins. They are designed to accurately align holes in sectional jigs. The handle allows for a T or L configuration by tapping the pin with a hammer. The T or L pin feature and clearance shouldered body allow for quick removal of the pin. The groove in the body can accept a clip and cable (lanyard) attaching the pin to the jig to prevent dropping, damage or loss. Ideal for various applications where alignment or locating is required. When used with BONEHAM bushes, these location pins create an extremely accurate location system.

Micronel high pressure medical blowers and turbine products are used in a wide variety of medical and scientific equipment requiring precise air movement of some kind. Applications such as Breathing therapy, Ventilators, Respirators, Personal Protection, ICU Air Mattresses, Air Purification, Disinfection, Air Sampling, Laboratory, Diagnostic & Test all require some form of air movement with significant pressure or suction (vacuum) to force air through tubes or chambers or overcome system/filter resistance. Micronel’s high performance blower range are perfectly tailored to the needs and requirements of medical breathing ventilation therapy. Full Intensive care unit (ICU) intubated ventilator systems may require over 60+ millibar pressure to fill and inflate diseased lungs. For less severe cases a less harsh treatment may be used with a tight-fitting mask to provide so called continuous positive airway pressure (CPAP) as an alternative non-invasive method of ventilator support for some patients. CPAP ventilators typically require around 20 to 30 millibars pressure to assist with breathing and oxygen therapy. Micronel’s medical blowers and turbines utilise long life, highly efficient high-speed brushless motor drives in the smallest form factors to generate high static pressures up to 16 mbar with up to 1000 l/min free blowing airflow. Crucially versions with Oxygen O2 and anaesthetic gas resistance are also available. Many other diverse medical related applications require air movement and pressure ranging from pressure relieving air mattresses to prevent bed sores in patients confined to hospital beds in intensive care, disinfection systems for a variety of settings through to air monitoring and sampling in pharmaceutical production plants and laboratories.

GRADE D Solder Grade D Solder is a 29-30% Sn, 1.5-1.8% Sb, balance Pb. It is produced in a cast Blowpipe Strip suitable for hand soldering of tanks, and ingot form for dipping pots. Melting range is 185 to 248°C. Although other solder grades are available, Grade D solder offers good useability at an economic price and has been the industry standard for many years. SN100C® Lead Free Solder Many users are now seeking a Pb/Free solder alternative and SN100C® provides the solution. The alloy was developed and patented by Nihon Superior Co. Ltd of Japan. The alloy is based on the tin/copper eutectic, with the addition of a small quantity of nickel and germanium which modifies its behaviour to the extent that the resultant alloy exhibits fluidity and wetting properties comparable to that of the traditional tin/lead solder it is designed to replace. It is available in Blowpipe Strips, Bars and Ingots. FF301 Soldering Flux FF301 is a hydrobromic acid based flux which is free of heavy metal salts. It is ideal for hand soldering applications and being non-flammable can be safely heated by flame. It works equally as well with both lead containing and lead free solder alloys. Post soldering residues are non corrosive. FFB1 Soldering Flux FFB1 is a hydrobromic acid based flux with higher thermal performance and is ideally suited to applications where the radiator is baked in an oven for several minutes. It should not be used for hand soldering as the flux activity would not degrade due to the lack of thermal input. B128 High Activity Soldering Flux B128 is a ZnCl based flux which should only be used to initially tin steel frames or brackets The residues are corrosive and should be removed immediately after use. D8 Stainless Steel Soldering Flux D8 is a highly active flux designed for soldering stainless steel components.

Discover the power of precision and productivity with Desoutter’s RAPID screw feeding system—an advanced automation solution engineered to streamline your assembly operations. Designed for high-performance environments, RAPID ensures accurate screw delivery, minimises manual handling, and significantly enhances throughput across a wide range of tightening applications. Trusted by leaders in the automotive, electronics, and general manufacturing industries, RAPID is the go-to solution where speed, reliability, and precision are non-negotiable. Whether you're optimising a manual workstation or integrating into a fully automated line, RAPID delivers the performance and flexibility your production demands. Effortless Integration. Maximum Performance.

Espec Reach In Environmental Test Chambers are engineered for ease of use & easy maintenance. With Internal volume from 120L, a variety of products can be tested depending on test profile. The range comprises of several different test chamber series for differing applications & over 100 different models.

We provide Specialist Electronics Recruitment Consultancy Services to the industry. We understand that recruitment requires trust. Our reputation both in training and recruitment has grown to become many companies first choice partner for their needs. We’ve developed our reputation by offering a consultative service, driven by honesty and proactive working. At The Electronics Group we invest time to understand the full needs of our clients’ vacancies allowing us to recruit effectively and accurately. We do not believe in mass sending CVs in the hope of one standing out. We pre-screen all candidates so we’re confident we are only sending candidates who could truly fill your requirements.

Automatic reelers and de-reelers control the transfer of the product through the reel-to-reel plants and together with computerised vision equipment even the most fragile of components can be plated. This form of plating lends itself particularly well to the plating of high value stamped components as well as pre-formed and plain strip. TPG offers selective gold and silver stripe both on strip and formed components with a variety of solder finishes. Also, overall and selective plating of most metals on strip and formed components can be completed by full/partial immersion.