ENVIRONMENTAL & LABORATORY TEST CHAMBERS Environmental & Technical Services Ltd (ETS) was established in 1983 to provide a comprehensive range of products and services to the environmental test industry. Recognising that a wide range of disciplines and experience would be required, ETS have assembled a team of highly trained and motivated people with all the necessary skills and knowledge to provide service such as: Services , Maintenance & Calibration of all makes of environmental chambers Custom made maintenance contracts to suit just your needs Refurbishment of you existing equipment including controller refurbs Availability of an extensive range of hire chambers Second user chambers New equipment from an extensive range of standard products Bespoke test equipment and much more. Our resources and expertise enable us to supply high quality equipment ranging from simple benchtop chambers to major turnkey projects. ETS can produce equipment to customers' exact requirements, from conception to completion; taking an active role in helping to ensure that the equipment proposed will not only meet the specification but be built to budget and delivered on time. ETS are involved in all stages of design, manufacture, installation, commissioning, service, maintenance and calibration of standard and specialised climatic chamber projects and can draw on years of experience to offer cost effective solutions to any environmental test problem. We have helped companies in a wide range of industry sectors including aerospace, automotive, defence, telecommunications and electronics to realise their climatic test objectives. ETS can offer two types of calibration: 1. Standard Calibration - traceable to national standards 2. UKAS Calibration - completed by our UKAS accredited calibration laboratory No. 9735 which has met the requirements of international standard ISO17025:2017, and as accredited by the United Kingdom Accreditation Service (UKAS). Standard calibration will indicate temperature and humidity readings including the instability of the readings. 17025 UKAS accredited calibration will also include uncertainty of each measurement. Certificate and calibration label will carry the UKAS logo including the laboratory number. Only approved UKAS engineers will undertake UKAS calibrations. Temperature calibration in the range of -80°C to +150°C Humidity calibration in the range of 20%rh to 95%rh Two-point calibration (centre of chamber and control point) and multipoint calibration can be undertaken. Multipoint calibration is also known as temperature/humidity mapping involving nine sensors. All readings are logged automatically, typically 100 readings at 10 second intervals to record the fluctuations within the chamber. All calibration quotations by ETS will allow for five temperature setpoints and four humidity setpoints. Additional setpoints may be added but will incur extra cost. For ovens, our calibrations will allow for 3 temperature setpoints. Fridges and freezers will be calibrated indicating the maximum and minimum temperatures throughout the compartment over at least three cyclic periods. Reading are typically at 30 second intervals. A calibration certificate and label will be issued on completion of the analysed results and if an agreed pass/fail criteria has been achieved. N.B: Calibration is a measurement against a calibrated instrument traceable to National Standards as found, it does not include adjustment. Adjustment involves re-calibration after adjustment. ETS can also undertake altitude calibration (pressure) but ETS cannot offer a UKAS calibration for this measurement. All ETS test equipment calibration is UKAS accredited.

European Circuits Limited are one of the few companies in the UK that genuinely offer PCB fabrication and assembly from a single location here in the UK. We are a privately owned company established in 1999 offering PCB manufacture, SMT Assembly, PTH Assembly, Cable Assembly and Product Build. Our goal is simple – to provide you with assistance and advice about your PCB requirements and produce these requirements to a high quality, on time and with excellent customer service whether that is prototype PCB’s or production volumes.

European Springs and Pressings Ltd, established in 1948, are leading experts in the field of spring manufacturing and high speed press technology. We’re dedicated to providing our clients with the best springs and pressings as Europe’s leading spring manufacturers and spring suppliers, and our products are used in major industrial environments all over the world. Here at European Springs we have the latest technology and qualified toolmakers to design and produce the very best bespoke stampings, springs and wire forms. Our low cost production and exceptional service gives us the competitive edge in the field.

Europlacer has been a trusted name in electronics manufacturing for over 50 years, offering Pick and Place, Printing and Full Line solutions for electronics manufacturers, including Automatic Optical Inspection, X-ray inspection, SMT reflow, PCB support tooling and handling systems. We have received numerous prestigious industry awards for innovation, best-in-class technologies and customer service excellence over the years. These serve to highlight the company’s commitments to continuous improvement, global infrastructure and outstanding support. Europlacer has a strong customer base across the world, with localized offices and partners offering local support.

Eurospray is one of the UK’s largest independant sub-contract paint finishing companies with two sites totalling 30,000 sq. ft. and 70+ employees. Established in 1998 to service the increasing demand of OEM’s for quality finishing at competitive prices, our aim is to ensure that the most appropriate, cost-effective solutions are used on products while building long-lasting relationships with our customers. Eurospray were the first paint company to gain ISO 9001 2015 accreditation for the application of powder coatings and wet spray painted finishes. We operate two powder coating plants – one of which has online pre-treatment allowing us to process thousands of parts each day. We have a skilled wet paint workforce made up of more than 25 experienced painters. We have 15 purpose-built wet paint booths across both sites. This gives us a good degree of flexibility when meeting our customer needs. We apply quality cosmetic and protective finishes across a range of markets including electronics, defence, rail, aerospace, retail, automotive, avionic, and medical. Some of our customers include BAE Systems, NCR, SONY, Ford, Thales, L3 Communications, Honeywell, Leonardo, Aston Martin and Jaguar Land Rover For the last 15 years we have also been involved in remanufacture/refurbishment programmes for companies such as Virgin Media, Sky, NCR, IBM, Virgin Trains and Toshiba,

Extreme Cases designs and manufactures lightweight, rugged aluminium containers, 19” racks and enclosures for demanding industrial environments. Drawing on experience from defence and mission-critical programmes, we bring the same engineering discipline and build quality to industrial, manufacturing and laboratory applications where equipment protection really matters. Our range includes IP66 aluminium cases, 19” rack systems for field and lab use, and custom case solutions for tools, instruments and equipment. We also offer precision-machined foam and Shadow Foam tool control, providing clear visual management and secure protection. Additional options include environmental dataloggers, fan monitoring and internal mounting systems, helping customers protect, monitor and deploy equipment with confidence. Exhibiting at Southern Manufacturing for the first time, we’re looking forward to meeting manufacturers and engineers seeking practical, well-engineered protection solutions. 👉 Visit our stand to meet the Extreme Cases team and discuss your application. Designed and manufactured in the UK, we support projects from one-off prototypes to production volumes.

FC Lane are the UK’s leading electrical connector products distributor offering the widest available selection of interconnection solutions from many of the industry’s leading connector manufacturers. We are a distributor of connectors and connector products for manufacturers including Eaton, HUBER+SUHNER, Positronic, Nicomatic, Glenair, Neutrik, HellermannTyton, Fibreco Cinch, Lemo and our sister Lodge Group company, Weald Electronics. With over 50 years behind us, we have always had the strongest commitment to quality, reliability and traceability procedures and hold a significant number of key approvals including IECQ – CECC, ISO and QPL. Our Quality Management System, which includes Weald Electronics is approved to ISO 9001:2015 for manufacturing, test, assembly, and product and component stockholding (FM588537). We can supply and support practically all connector types including multi pin circular, high power circular, data circular, filtered, RF / coaxial, D-sub miniature, multi pin rectangular, IDC / DIN, PCB connectors, edge connectors, backshells and adaptors and connectors for rack and panel applications. Our specialist division, Lane Motorsport, provides all autosport/motorsport sectors with a comprehensive, high performance connector and accessory package. We offer next day delivery on more than 90% of our standard offering while, for non-standard products, we offer rapid in-house development, assembly and testing of specialist military, industrial and motorsport circular connectors on lead times which are generally much quicker than those offered by other connector suppliers.

FB-AVAK offers a complete vacuum forming service creating mouldings up to 2.0m x 1.2m, with both 3 and 5 axis CNC machining, in-house tool making and product design and development.

FFT (HK) Ltd designs and manufactures high-quality injection mould tooling in our wholly foreign-owned factory in China. We are the manufacturer, not agents. Every tool is built to true European standards, using imported steels and European standard components. Our focus is on maximum productivity and durability. With in-house design and rigorous testing, we deliver tooling for technically demanding parts using high-specification engineering polymers. Competitive lead times and pricing are combined with European business practices and English-speaking engineers for clear communication and peace of mind. FFT specialises in complex tooling with consistent quality and on-time delivery. Confidence, peace of mind, and injection mould tooling to the standards you demand.